Sign In | Join Free | My
There is no end for improvement. To be a better man before to make a better product.
Home > Hot in Place Recycling Equipment >

2 Layer Stratified Heating And Milling Hot In Place Recycling Equipment 10KM / H

2 Layer Stratified Heating And Milling Hot In Place Recycling Equipment 10KM / H

Brand Name : Xitong
Model Number : ARHR-5120A
Certification : CE/CNAS/SGS/ISO
Place of Origin : China
MOQ : 1 set
Price : negotiation
Supply Ability : 5 sets per month
Delivery Time : 2 month after received down payment/negotiation
Packaging Details : nude packing/bulk ship/ro-ro ship
Heating method : Closed Circulation of hot air
Heating truck : 3 units
Milling planer : 2 units
Maintained thickness : 6CM pavement
Finish paving temp. : ≥70℃
Damages : Loosing, pot holes, ruts, flushing, waves
Recycled asphalt deviation : ±0.3%
Maintain method : stratified heating and scarifying and milling
Standard : JTGF41-2008
Contact Now

2 layer stratified heating and milling Hot in place recycling equipment with 10KM/H travel speed

Appearance identification after hot in place recycling treatment for road pavement:

(1) Smooth and dense surface, there should be no flushing, loosening, crack, segregation of coarse and fine aggregate. Defective area shall not exceed 0.03% of the inspected area.

(2) Joints should be compact and smooth.

(3) Construction lane and the adjacent lane should be connected smoothly, elevation difference should meet the standard requirements.

(4) No obvious wheelmarks on the surface.

Other control points in the construction process of surface course

(1) The milling depth should be uniform. Various depth of milling will seriously affect the uniformity of the recycled mixture and the evenness of the recycling pavement.

(2) Precise control of the added material. Spraying system of adding material like additive should be accurate and adequately mixed, which is the key factor to ensure the quality of the recycling road surface. Through calibrating before construction and everyday accounting of total amount in the construction process, the new added material addition amount should be controlled within the range of ±3% of designed requirements.

(3) Control of evenness and compactness

Paving should be maintained continuous, stable, uninterrupted at a constant speed, carry out pretreatment to the bridge head (joint), start and end and other key parts.

Arrange specially-assigned person to control the rolling mode, rolling sequence, rolling numbers, rolling temp., rolling speed , roller watering, rolling section length and turning method and other links.

Parameter for hot in-place recycling scarifying unit

VehicleMilling machine basic configuration parameters and performance parameters:
Overall parameters

Overall dimension



Dead weight

Using weight

Minimum ground clearance250mm
TreadSteering bridge2445mm
Driving axle2290mm

Running/climbing capacity

Working gear0-8m/min
Working gear climbing capacity10%
Running gear0-10Km/h
Running gear climbing capacity7%
Net rated power315Kw/1500rpm
Max oil consumption130L/h
Idle speed1200rpm
Maximum unloaded speed1900rpm
Transfer caseBrevini
Speed ratio1

Hot wind generation system

Burner modelRL100
Fueldiesel oil
Heating capacity2×100×104kcal/h
Heating modehot wind
Hot air temperature500-700℃
Hot air recycling temperature250-350℃
Regenerant heating systemBurner model40-G10
Fueldiesel oil
Heating capacity54-120Kw
Asphalt heating systemBurner model40-G10
Fueldiesel oil
Heating capacity54-120Kw
Heater travel and heating areaLift travel480mm
Left side telescopic stroke850mm
Right side telescopic stroke850mm
Heating area of each heater



GeneratorMecc alte
Hydraulic oil coolerAKG
Cooler model4960.020.0000
Cooler motor power141.5Kw
Tank volumeBurner diesel tank4200L
Hydraulic oil tank1410L
Asphalt tank700L
Regenerant tank500L
Thermal oil220L (regenerant heating)
Running systemFront axleRigid steering bridge
Mediumtandem axle
Rear axledrive axle
Front axle wheel rimLRF140200
Front axle inflatable type solid tyre11.00-20
Medium/rear axle wheel rim8.00V-20
Medium/rear axle pneumatic tire11.00-20
Milling systemMilling depth0-60mm

Bilateral milling drum

Left side telescopic stroke680mm
Right side telescopic stroke680mm
Milling width2640mm(min)
Intermediate milling drum operation width1785mm

Product Tags:

road recycler machine


bitumen laying plants

China Customized Inflatable Bumper Ball Game Bubble Adult Grass CE supplier

2 Layer Stratified Heating And Milling Hot In Place Recycling Equipment 10KM / H Images

Inquiry Cart 0
Send your message to this supplier
Characters Remaining: (0/3000)