Sign In | Join Free | My
There is no end for improvement. To be a better man before to make a better product.
Home > Hot in Place Recycling Equipment >

Pavement Recycling Systems Hot In Place Recycling Equipment Excellent Bonding

Pavement Recycling Systems Hot In Place Recycling Equipment Excellent Bonding

Brand Name : Xitong
Model Number : ARHR-5120A
Certification : CE/CNAS/SGS/ISO
Place of Origin : China
MOQ : 1 set
Price : negotiation
Supply Ability : 5 sets per month
Delivery Time : 2 month after received down payment/negotiation
Packaging Details : nude packing/bulk ship/ro-ro ship
Heating method : Closed Circulation of hot air
Material bank temperature : ≥110℃
water permeability coefficient : No more than 200ml
Maintained thickness : 6CM pavement
Finish paving temp. : ≥70℃
Damages : Loosing, pot holes, ruts, flushing, waves
Recycled asphalt deviation : ±0.3%
Stability : more than 8KN
Pavement temperature : ≥140℃
Contact Now

160~180℃ heated pavement hot in place recycling equipment with excellent bonding effect

Composition of complete asphalt hot in place reclamation vehicles:

1. Hot air circulation Heaters

To avoid asphalt aging due to high temperature caused by heating, Heater adopts controllable high-pressure hot air circulation heating system to heat the asphalt pavement, which improves heat conducting efficiency of under-pavement, while controlling the temperature of the road surface to be less than 195℃, temperature at the depth of 4 cm depth up to about 85 ℃. Meanwhile, hot air circulation minimizes the energy consumption.

2. Miller

After heated by air circulation system, miller mills the softened asphalt pavement and collects loosened material, then pushes the asphalt mixture towards the middle of the road, forming a bank, and successively adding metered regenerant and asphalt. At this moment the bank temperature is about 100 ℃.

3. Remixer

New asphalt mixture according to designed composition are delivered to the ground bank evenly by the receiving hopper, recycling material and new material are reheated after been flattened and layered by the distributor; When layered heating, recycling material will form a larger heating area, thinner material layer, to quicken temperature increasing speed that up to 140℃, which also would be hard to age. Heated recycling material will be transported to the mixing tank through scraper hoist, then mixed thoroughly and delivered to the paver for paving. And finished by the roller according to prescribed standard, the traffic could be reopened as soon as the road surface temperature drops below 50℃.

Compared with the traditional method of construction, the old road materials can be completely reused, application of hot in-place recycling construction could save 70% of the repairing time, 50% of the operating personnel, saving 90% of the new asphalt mixture and 40% of maintenance cost.

VehicleHeater(heating unit) basic configuration parameters and performance parameters:
Net rated power121Kw/2200rpm
Oil consumption in rated condition213g/Kwh
Idle speed700rpm
Max unloaded speed2420rpm
Transfer caseBrevini
Speed ratio1.02
Heating system (two hot wind stove)Riello
Burner modelPRESS-3G
Fueldiesel oil
Heating capacity2×100×104kcal/h
Heating modehot air
Hot air temperature500-700℃
Hot air recycling temperature250-350℃
Heater travel and heating areaLift travel480mm
Left side telescopic stroke850mm
Right side telescopic stroke850mm
Heating area of each heater



GeneratorMecc alte
Hydraulic oil coolerAKG
Cooler modelT8
Cooler motor power1.1Kw
Tank volumeBurner diesel tank1800L
Engine diesel tank240L
Hydraulic oil tank550L
Running systemFront axleArticulated steering bridge
Rear axledouble speed rigid drive axle
Wheel rim8.5-24
The inflatable type solid tyre12.00-24

Product Tags:

asphalt paving machine


road recycler machine

China Customized Inflatable Bumper Ball Game Bubble Adult Grass CE supplier

Pavement Recycling Systems Hot In Place Recycling Equipment Excellent Bonding Images

Inquiry Cart 0
Send your message to this supplier
Characters Remaining: (0/3000)